Brum
Still having a life
66' Split
Posts: 316
|
Post by Brum on Jun 30, 2008 9:46:12 GMT 1
I want to change one of my ouput flanges on the gearbox, but cannot find one anywhere. Can any one help?
|
|
|
Post by keredewor on Jun 30, 2008 18:31:37 GMT 1
|
|
Brum
Still having a life
66' Split
Posts: 316
|
Post by Brum on Jul 1, 2008 9:50:08 GMT 1
Thanks for link Derek, but these are CV Joints, Cv boots, bolts etc..
I actually want the output flange that is part of the gearbox. The bit that the cv joints bolt to.
Ive seen a couple on american websites and certain performance parts websites but I dont know if they will fit the standard 1700cc gearbox.
I'm trying to avoid taking it off to use as an example to find the part as if I do that I cant use the bus.
Cheers
Rich..
|
|
|
Post by keredewor on Jul 1, 2008 20:48:22 GMT 1
Ah...I understand, I thought you just needed the CV Joints/boots etc.
I would give Heritage a call and explain the part you require from their exploded diagram, they actually can source parts even though they are not listed, failing that I would give KarmannKonnection a call and failing that Keith at Relics or Graham at FBI or Wayne at Volksheaven.... or Jez at Dubtricks, one of that lot will be able to help you
|
|
Brum
Still having a life
66' Split
Posts: 316
|
Post by Brum on Jul 1, 2008 20:51:58 GMT 1
Cheers Derek, I shall give them a call. Rich..
|
|