|
Post by kaz02 ( carolina ) on May 18, 2008 10:09:09 GMT 1
Hi we sold some hammocks to a lovely couple yesterday and whilst we were showing the bus off to them got talking. He has a 69 Devon with the table that has four legs for outside then two legs when it fit inside the van to the wall, he said he has serched hi and low for the aluminium strip that goes onto the wall of his van to support the table. I mentioned our club and how you are very knowledgable and that i would put a post on for him and see if anyone can give him some leads. Thanks guys. ;D
|
|
|
Post by keredewor on May 18, 2008 11:12:33 GMT 1
B&Q sell aluminium profiles, angles, squares, oblongs, I think the Devon profile is a simple angle strip.
|
|
|
Post by kaz02 ( carolina ) on May 18, 2008 12:09:07 GMT 1
cheers will let him know. Not sure if hes trying to get original but i would imagine they damage pretty easily so he may be better getting new and ajusting. thanks derek
|
|
biscuit
To much time on my hands
1971 Devon moonraker
Posts: 650
|
Post by biscuit on Jun 23, 2008 22:51:28 GMT 1
Hi,
I have an original that I was keeping for a spare if he wants it? send me a pm or something and i can bring to the next meet or post.
Let me know
Cheers
Simon
|
|
alamo
New HDvwClub Dubber
Posts: 3
|
Post by alamo on Jun 30, 2008 15:04:49 GMT 1
PM sent Simon Thanks - Alan
|
|
alamo
New HDvwClub Dubber
Posts: 3
|
Post by alamo on Jul 25, 2008 22:53:21 GMT 1
I'm still after this as the one that "biscuit" had was the piece that's on the table edge. The bit that I'm looking for is the piece that mounts to the wall of the van. Unfortunately it is not just a straightforward angle but is specially shaped to "interlock" with the strip on the table edge.
Can anyone help???
|
|
MushyPea
Senior Member
'67 Splittie
Posts: 168
|
Post by MushyPea on Jul 27, 2008 11:28:42 GMT 1
I know of someone who may have it. Will let you know if I catch him.
|
|
|
Post by Twodogs on Jul 27, 2008 20:32:57 GMT 1
I'm still after this as the one that "biscuit" had was the piece that's on the table edge. The bit that I'm looking for is the piece that mounts to the wall of the van. Unfortunately it is not just a straightforward angle but is specially shaped to "interlock" with the strip on the table edge. Can anyone help??? You're best bet might be on the Earlybay web site or on Volks zone web site. The other thing would be to look round all the autojumble stalls at the shows. Good luck with the search. Cheers Mick
|
|
alamo
New HDvwClub Dubber
Posts: 3
|
Post by alamo on Aug 5, 2008 14:20:44 GMT 1
Just to let everyone know that I got fixed up with one of these from a guy on Earlybay.com. Also managed to get a couple of Devon tables (with all the legs!) from a guy on Volkszone. I had been looking on all the forums and around the autojumbles at various shows for over 12 months without success. Anyway sorted now - thanks to everyone for their help. Alan
|
|